Search

… during cold-weather operation. ROTATION VALVE INPUT © 2022 Genesis Attachments, LLC GXTHRM 1/22 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - …

… Maintenance Maintenance Minute Operating the shear below the recommended flow and/or pressure range will … performance and may damage the rotate motor. Operating the shear above the recommended flow and/or pressure range may damage the shear and its hydraulic components. HYDRAULIC REQUIREMENTS …

… more than a 3/4 inch radius on edges of tool. Build up the jaw to slightly higher than the original parent material … any flat areas of the jaws and on the outside of the upper jaw. Do not crosshatch the curved areas of the jaws near the …

… © 2019 Genesis Attachments, LLC GVP 07 Build-Up and Hard-Surfacing … Grain Grain Staggered stringers Grain Shear Jaw Set 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– …

… the end cap, tie rod and tie rod nut 9 Lower shear jaw 10 Chin – keep top edge built up, maintain radiuses in … Grease all locations until grease extrusion is visible with jaw open and closed. 8-HOUR CHECKLIST Inspect: • Bolts - … checklists on page 4 until grease extrusion is visible with the jaw open and closed. After greasing the rotation …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … not wear lower than the height of a new blade. If either jaw wears down lower than blade height, immediately stop … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… contenant du molybdène (Moly). La graisse au lithium Genesis GLG-2MC anti-usure pour pression extrême … par tous les opérateurs et le personnel d’entretien. © 2024 Genesis Attachments, LLC GXTRef_FC 1/24 Rév. K Le présent …