Search

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … existing hard-surfacing. � Preheat area to 350˚ F (177˚ C). Maintain this temperature throughout the procedure. Do not exceed 450˚ F (232˚ C) interpass temperature. During welding: � Always grind and …

… Rebuild. 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252– … that no longer supports the blades • Upper and lower jaw knife edges that no longer run parallel to each other …

… GDT Gabarits de contrôle de l’état des dents © 2022 Genesis Attachments, LLC GDTBuildupTemplates_FC 9/22 Rev. B Une entreprise 1000 Genesis Drive, Superior, WI 54880 Tél. : +1 715 395-5252 - … dents du processeur par rapport à leur forme d’origine, Genesis a créé des gabarits de contrôle de l’état des dents. …

… pressure as indicated in the chart below. The maximum case drain measured at the shear while rotating and cycling …

… performance and optimizes the life of replacement parts. As teeth become worn, they need to be rotated, … needed. Contact your local Genesis dealer or the Genesis Parts Department to order. Line 1 1/2” wear - schedule …

… genesisattachments.com Patents: genesisattachments.com/products/patents Model Part Number Template 190 9102985 290 & …

… is recommended for all temperature conditions. The shear jaws must be closed for access to all grease fittings. Grease …

… © 2022 Genesis Attachments, LLC GVP 07 Hydraulic/Rotation … Maintenance Maintenance Minute GVP07HRM 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - … This may result in serious personal injury and damage to equipment. Improper torques will also cause uneven wear on …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … rapidly until it begins to cut. The valve shifts, slowing jaw close and increasing power. You may hear a squeal or hiss … power mode later, turn in (clockwise). Loosen the lock nut with a 9/16” socket. Turn cartridge 180˚ (half-turn, 145 PSI) …

… dents du processeur par rapport à leur forme d’origine, Genesis a créé des gabarits de contrôle de l’état des dents. … ou remplacer la pièce. Communiquez avec votre revendeur Genesis local ou avec le service de pièces de Genesis pour commander. GDR Gabarits de contrôle de l’état …

… © 2019 Genesis Attachments, LLC GDR Build-Up and Hard-Surfacing Maintenance Minute GDRBUHS 8/19 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– …

… LXP® Tooth Build-Up Templates © 2021 Genesis Attachments, LLC LXPBuildupTemplates 4/21 Rev. A … 200 & 300 9100582 9100583 9100584 Properly maintaining demolition attachment teeth maximizes performance and … 1 1/2” wear - schedule maintenance to flip or rotate in jaw Line 2 1” wear - flip, rotate in jaw or build up Line 3 …

… Subsea Shear (GSS) FEATURES © 2024 Genesis Attachments, LLC GSS 4/24 Rev. K Pressure tested to operate … 12,300 32 32 GSS 775 14,700 35 37 GSS 2555 46,000 54 56 Genesis GSS shears are covered by a 12-month, 1,500-hour …