Search

… 889 940 2,946 31 61 GXT 775R 8,051 889 940 3,962 36 68 GXT 995 8,165 991 1,067 3,251 36 77 GXT 995R 9,072 991 1,067 …

… B https://www.genesisattachments.com/sites/default/files/literature/maintenance-minute/GeneralWeldingGuidelines_C.pdf …

… GXP Hydraulic/Rotation Maintenance Maintenance Minute Operating the shear below the recommended flow and/or pressure range will … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. Hard-Surfacing 8/19 Rev. … es/literature/maintenance-minute/GeneralWeldingGuidelines_C.pdf … Hard-Surfacing …

… GXT Hydraulic/Rotation Maintenance Maintenance Minute … VALVE INPUT © 2022 Genesis Attachments, LLC GXTHRM 1/22 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … Bar 335 60-90 GPM 227-340 LPM 445 73-110 GPM 276-416 LPM 555 86-128 GPM 325-484 LPM 665 105-155 GPM 397-587 LPM 775 …

… 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - Tel: 715.395.5252 - … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … power mode later, turn in (clockwise). Loosen the lock nut with a 9/16” socket. Turn cartridge 180˚ (half-turn, 145 PSI) …

… to build up, using a straight-edge or square. Do not allow jaws to wear to more than a 3/4 inch radius on edges of tool. … in place of straight stringers on any flat areas of the jaws and on the outside of the upper jaw. Do not crosshatch the curved areas of the jaws near the pivot. Use only straight stringers on these …

… https://www.genesisattachments.com/sites/default/files/literature/maintenance-minute/BoltTorque_MaintMin_E_0.pdf … …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. A regeneration valve … and power modes. When the cartridge is properly set, the processor closes rapidly until it begins to cut. The valve …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) – Tel: 715.395.5252 – …

… or square. Jaws must not wear lower than the height of a new blade. Use a new blade to help determine build-up height for the jaw. … build-up is complete, grind material to be flush with a new blade. Note: Closely monitor areas above guide blade bolt …

… solamente como una referencia rápida. No reemplaza al manual de seguridad y del operador de GXP, que deben seguir … solamente como una referencia rápida. No reemplaza al manual de seguridad y del operador de GXP, que deben seguir … solamente como una referencia rápida. No reemplaza al manual de seguridad y del operador de GXP, que deben seguir …