Search

… Cyclone 60 (GCG 60) PARTS MANUAL © 2019 Genesis Attachments, …

… Cyclone 50 (GCG 50) PARTS MANUAL © 2019 Genesis Attachments, …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. GXPBR 8/19 Rev. B Blade … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all …

… Cisaille mobile GXT Shear Jaw ArmorMD MANUEL D’INSTALLATION SUR LE TERRAIN © 2023 Genesis Attachments, LLCGenesis GXT Shear Jaw ArmorMD2 COORDONNÉES Consultez et téléchargez tous …

… de Genesis 5 TABLES DES MATIÈRES COORDONNÉES DE CONTACT 2 PRÉFACE 3 Important 3 Remplacement du manuel 3 Variations … BOULONS DE MONTAGE DE MOTEUR TOUS LES BOULONS DE BRIDE EN 2 PIÈCES TOUS LES BOULONS DE COURONNE DE ROTATION TOUTES LES … DU COLLECTEUR PIVOTANT TOUS LES BOULONS DE BRIDE EN 2 PIÈCES TOUS LES BOULONS DE COURONNE DE ROTATION TOUS LES …

… XP Mobile Shear (GXP) FEATURES 2 3 4 5 6 7 1 1 2 3 5 6 7 4 Model Weight* Jaw … (ins.) (ft. ins.) Boom Mount (lbs) Stick Mount (lbs) GXP 200*** 5,000 18 17 5' 10" 25,000 40,000 GXP 200R*** 5,500 18 17 8' 9" 30,000 45,000 GXP 300*** 7,700 …

… 3,226 39 61 GXP 990R MAXX 8,391 889 889 4,572 45 77 GXP 1000 6,804 965 965 3,277 40 63 GXP 1000R 8,165 965 965 4,597 … warranty. Genesis reserves the right to continually make product improvements designed to positively enhance … genesisattachments.com/products/patents Metric Specs: 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT …

… cutting blades position apex closer to the rear of the jaws and draw material further into the jaws where higher force makes efficient cuts Weld-on, … enhance performance. Patents: genesisattachments.com/products/patents APPLICATIONS – Scrap Processing – Demolition …

… GXT_Metric 8/22 Rev. S All the power in a shorter, lighter shear with a center of gravity closer to the excavator. Most … ground contact Reverse-mounted hydraulic cylinder shortens shear length and weight while protecting rod from damage … COMPATIBLE APPLICATIONS – Scrap Processing – Demolition XT Mobile Shear (GXT) 1 2 5 6 8 9 7 3 4 3 6 … GXT Spec Sheet - …

… doble 19 INSTALACIÓN DEL MECANISMO DE ROTACIÓN 21 GXT 115-335 motor de rotación 21 GXT 445 y motores de rotación … retorno existente. Conecte solo al tanque hidráulico. GXT 115-335 motor de rotación El motor gerotor es un motor de … en el Manual de suje- tadores Genesis.! AVISO GXT 115 - 2055: 0.051 mm - 0.254 mm GXT 2555: 0.762 mm - 0.889 mm …

… 1/22 Rev. D 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - Tel: 715.395.5252 - … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … Grease all locations until grease extrusion is visible with jaw open and closed. 8-HOUR CHECKLIST � Bolts - check …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – …

… 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - Tel: 715.395.5252 - … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … power mode later, turn in (clockwise). Loosen the lock nut with a 9/16” socket. Turn cartridge 180˚ (half-turn, 145 PSI) …

… worn, they need to be rotated, built-up or replaced. To help customers determine and monitor how far processor teeth …

… par Genesis Shear Jaw ArmorMD, les protections robustes GXT et Grapple Jaw Armor sont non seulement synonymes de … de valeur, mais dépassent également largement les cycles d'usure normaux. Fabriqués dans notre acier GenGuard … Shear Jaw ArmorMD Protections anti-usure robustes GXT APPLICATIONS • Démolition • Manutention et compactage de …

… to build up, using a straight-edge or square. Do not allow jaws to wear to more than a 3/4 inch radius on edges of tool. … in place of straight stringers on any flat areas of the jaws and on the outside of the upper jaw. Do not crosshatch the curved areas of the jaws near the pivot. Use only straight stringers on these …

… GMP Tooth Build-Up Templates © 2021 Genesis Attachments, LLC GMPBuildupTemplates … their original shape, Genesis has created tooth build-up templates. Each template is sized and formed to that tooth’s … on flippable teeth Line 3 Line 1 Line 2 GMP Tooth Build-Up Templates © 2021 Genesis Attachments, LLC GMPBuildupTemplates …

… GMP Tooth Build-Up Templates © 2021 Genesis Attachments, LLC GMPBuildupTemplates … their original shape, Genesis has created tooth build-up templates. Each template is sized and formed to that tooth’s … on flippable teeth Line 3 Line 1 Line 2 GMP Tooth Build-Up Templates © 2021 Genesis Attachments, LLC GMPBuildupTemplates …