Search

… without Work Tool Auxiliary Hydraulics When installing a shear or other attachment that requires 2 pump flow on a … dual excavator control valves lessen the back pressure on jaw open/cylinder retract. The stick circuit must be oriented … of the stick circuit goes to the rod/retract side of the shear cylinder. If this orientation is not followed, there …

… can be ordered from your Genesis dealer or the Genesis Parts Department with the serial number of your attachment …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – …

… © 2019 Genesis Attachments, LLC LXP® Cracker Jaw Maintenance Blade … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … blades, tip and jaw is required for optimal performance. CONCRETE CRACKING TIPS At the end of each shift, check the …

… cylinder rod (two locations, 10 pumps per fitting) � Main shaft end caps (both sides, five pumps with jaw open, five pumps with jaw closed) � Main shaft lower (two locations) � Rotation bearing (four … attachment through two full rotations. GREASE LOCATIONS 1. Main shaft - one each side 2. Rear pins - one each side 3. …

… INPUT © 2020 Genesis Attachments, LLC GXPHRM 9/20 Rev. A 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … GPM 322-473 LPM 660 & 700 105-155 GPM 397-587 LPM 990 & 1000 150-190 GPM 568-719 LPM 1200 175-240 GPM 662-908 LPM … - 660 7-11 GPM 26-42 LPM 1800-2000 PSI 125-138 Bar 700 - 1000 8-12 GPM 30-45 LPM 1200 & 1500 12-18 GPM 45-68 LPM 2500 …

… Apply single passes in each line with the grain of the steel, peening after each pass. See drawings for grain, as …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - Tel: 715.395.5252 - … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all … https://www.genesisattachments.com/sites/default/files/literature/maintenance-minute/BoltTorque_MaintMin_E_0.pdf … …

… 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - Tel: 715.395.5252 - … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. Model Flow Supply …

… 8/19 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … slightly higher than the original parent material profile with E7018. Apply single passes in each line with the grain …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… © 2022 Genesis Attachments, LLC GVP 07 Daily Maintenance Checklist Performing scheduled maintenance will … require shortened maintenance intervals.NOTICE … GVP 07 Daily Maintenance …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … If the rounded grooves are welded up, use a die grinder with a carbide tool to recut these areas to their original … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) – Tel: 715.395.5252 – …