Search

… excavator return filters in the tank. For complete details about case drains, see Tim’s Tech Tip - Rotation Circuits …

… and using them may void the warranty. Maintenance Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … as needed to bring into tolerance. � Torque bolts to spec and recheck the tolerances. � Do not use more than … exceed 0.060”. SHIMMING © 2019 Genesis Attachments, LLC 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT …

… and using them may void the warranty. Maintenance Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … as needed to bring into tolerance. � Torque bolts to spec and recheck the tolerances. � Do not use more than … Adjustment Plates Blades © 2019 Genesis Attachments, LLC 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and … It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. General Welding … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – …

… © 2019 Genesis Attachments, LLC LXP® Cracker Jaw Maintenance Blade … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … blades, tip and jaw is required for optimal performance. CONCRETE CRACKING TIPS At the end of each shift, check the …

… cylinder rod (two locations, 10 pumps per fitting) � Main shaft end caps (both sides, five pumps with jaw open, five pumps with jaw closed) � Main shaft lower (two locations) � Rotation bearing (four … attachment through two full rotations. GREASE LOCATIONS 1. Main shaft - one each side 2. Rear pins - one each side 3. …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… © 2019 Genesis Attachments, LLC GDT Build-Up and Hard-Surfacing Maintenance Minute GDTBUHS 8/19 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… © 2022 Genesis Attachments, LLC GDTHRM 1/22 Rev. C 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT …

… © 2019 Genesis Attachments, LLC GDR Build-Up and Hard-Surfacing … 8/19 Rev. B 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… and the hard-surfacing will break away. Maintenance Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … B https://www.genesisattachments.com/sites/default/files/literature/maintenance-minute/GeneralWeldingGuidelines_C.pdf …

… © 2022 Genesis Attachments, LLC GVP 07 Daily Maintenance Checklist … in the following checklists. Maintenance Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) - … 0 grease. Do not use grease containing Molybdenum (Moly). Genesis GLG-2™ anti-wear, extreme-pressure lithium grease, PN …

… Teeth Maintenance Maintenance Minute GDRTHLDR 9/20 Rev. A 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … Hard-Surfacing Instructions to keep these areas at factory spec. Genesis offers tooth holder templates to assist in …

… is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed by all operators and maintenance personnel. General Welding … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) – Tel: 715.395.5252 – …

… and the hard-surfacing will break away. Maintenance Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT … B https://www.genesisattachments.com/sites/default/files/literature/maintenance-minute/GeneralWeldingGuidelines_C.pdf …