Search

… side • Set the specified oil volume for the Cyclone • Backup the pre-settings • Record the setting values • …

… shorten its life. Additional Precautions for Long Term Storage (longer than one month): • Store the breaker in … - 145 90.8 - 104.3 157.2 - 176.2 174.8 - 196.5 1.5 69 - 83 120 - 138 140 - 158 93.5 - 112.5 162.6 - 187 189.7 - 214.1 … Oil Flow gpm (lpm) 21.9 - 29 (80 - 110) 23.7 - 31.7 (90 - 120) 26.4 - 39.6 (100 - 150) 31.7 - 47.6 (120 - 180) Back …

… Cyclone 30 (GCG 30) SAFETY & OPERATOR’S MANUAL © 2019 Genesis Attachments, LLCGenesis GCG 302 CONTACT INFORMATION … Operating the Cyclone with excavators for which it is not designed. • Operating the Cyclone with damaged or missing … the cutting drum. Tighten these screws to a torque of 480 ft-lbs. to prevent damage to the square socket head …

… side • Set the specified oil volume for the Cyclone • Backup the pre-settings • Record the setting values • …

… side • Set the specified oil volume for the Cyclone • Backup the pre-settings • Record the setting values • …

… operators must ensure there is prioritized oil flow to the main valves in overhead operations or high reach conditions. … to excavator 2nd member (*not shown) 5 Rear Cylinder Pin Main cylinder connection to attachment stick 6 Stick or Body Houses and protects the main hydraulic cylinder 7 AutoGuide or Puck See the Genesis …

… 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 E-mail: … changes and improvements to its products and technical literature at any time without public notice or obligation. … Maintenance 23 BOLT TORQUE SPECS 24 LUBRICATION POINTS 25 JAW SET CHANGE-OVER 26 Jaw Removal 26 Jaw Installation 26 JAW …

… changes and improvements to its products and technical literature at any time without public notice or obligation. …

… Connect power link of excavator to the grapple. (Diagram C) Align the stabilizer arm with the lower grapple jaw by … grapple mount pins. Diagram D Diagram A Diagram B Diagram C Diagram E GRAPPLE INSTALLATION ! WARNING Make sure all … parts lists and invoices for outside contractors. Reference the authorization number on all invoices. When …

… 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 E-mail: … changes and improvements to its products and technical literature at any time without public notice or obligation. … Attachment 12 Equipment Condition 12 Working Overhead 12 Power Lines 12 Use Care with Hydraulic Fluid Pressure 13 …

… GXT Mobile Shear SAFETY & OPERATOR’S MANUAL © 2024 Genesis … GUIDE 66 WARRANTY 69 Claim Procedure 69 Blade Warranty 69 PARTS ORDER POLICY AND PROCEDURE 70 Parts Orders Should … using a cross bolt pattern. PIERCING BLADES GXT 115 - 2055: 0.002” - 0.010” GXT 2555: 0.030” - 0.035” Correct …

… changes and improvements to its products and technical literature at any time without public notice or obligation. …

… to a rest position on the ground. 3 Shut off the carrier engine. 3 Work controls in all directions to relieve … equipment. 3 Never leave equipment unattended with the engine running or with the attachment in a raised position. … pressure is needed to open the jaw, which pulls down the engine, de-strokes the pumps, increases jaw cycle time, …

… Handling Grapple (GHG) Models GHG 75 - GHG 125 SAFETY & OPERATOR’S MANUAL © 2024 Genesis Attachments, LLCGenesis GHG 75-125 Handling Grapple2 … your Genesis attachment. It is the responsibility of the product’s owner to ensure the operator is trained in the safe …

… also the most effective time to process materials such as sheet metal or wire. The new or repaired edges will cut more …

… Grapple (GSG) SAFETY & OPERATOR’S MANUAL All Models © 2024 Genesis Attachments, LLCGenesis GSG2 CONTACT INFORMATION View … [email protected] Europe/Africa/Middle East Genesis GmbH Teramostrasse 23 87700 Memmingen, Germany Phone: +49 83 31 9 25 98 0 Fax: +49 83 31 9 25 98 80 genesis-europe.com E-mail: info@genesis-europe.com Central …