Search

… personnel. 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748) – Tel: 715.395.5252 – … Line Attachment Case-Drain Minimum Case-Drain Size GXT 115R - GXT 335R No N/A GXT 445R - GXT 995R Yes ½" GXT 1555R - GXT …

… dual excavator control valves lessen the back- pressure on jaw open/cylinder retract. The bucket circuit must be … and auxiliary circuit flow as one. If there is an issue with spiking when flow is reversed while the cylinder is … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… It does not replace the product safety and operator’s manuals, which must be followed by all operators and … It does not replace the product safety and operator’s manuals, which must be followed by all operators and …

… Blade Configuration © 2019 Genesis Attachments, LLC LXP® Shear Jaw Primary & Secondary Blade Rotation Proper maintenance of the shear jaw primary and secondary blades, or cutting blades, is … Minute 1000 Genesis Drive, Superior, WI 54880 888-SHEAR-IT (743-2748)– Tel: 715.395.5252 – …

… excessive blade wear and undue stress to upper and lower jaws. Rotate blades to use all four cutting edges. Always use … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… excessive blade wear and undue stress to upper and lower jaws. Rotate blades to use all four cutting edges. Always use … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed … is a quick reference only. It does not replace the product safety and operator’s manuals, which must be followed …

… existing hard-surfacing. � Preheat area to 350˚ F (177˚ C). Maintain this temperature throughout the procedure. Do not exceed 450˚ F (232˚ C) interpass temperature. During welding: � Always grind and … to cool. © 2019 Genesis Attachments, LLC WeldGuide 8/19 Rev. C … General Welding Guidelines …

… existing hard-surfacing. � Preheat area to 350˚ F (177˚ C). Maintain this temperature throughout the procedure. Do not exceed 450˚ F (232˚ C) interpass temperature. During welding: � Always grind and … to cool. © 2019 Genesis Attachments, LLC WeldGuide 8/19 Rev. C … General Welding Guidelines …

… included 1 2 3 4 5 6 6 © 2022 Genesis Attachments, LLC GLS_Metric 4/22 Rev. H 1000 Genesis Drive, Superior, WI 54880 … 27 - 36 GLS 90 2,410 686 686 36 - 49 Metric Specs: … GLS Spec Sheet - Metric …

… genesisattachments.com/products/patents Concrete Cracker (GCC) FEATURES 6 Model Weight* Jaw Opening** Excavator Weight … – Demolition – C&D Processing – Concrete Recycling … GCC Spec Sheet - Metric …

… 1 2 3 4 5 4 Staggered jaws make two cuts with each cycle, applying maximum force to … of the lower jaw 16-inch cut length for a higher value end product Stiff arm and mounting pad included *Weight includes … warranty. Genesis reserves the right to continually make product improvements designed to positively enhance …

… Rhino horn aids in positioning material for processing Common pivot group and pinning points accommodate the full …